Imprimer cette page

Xavier Mininger

Untitled document

Professeur des Universités (Université Paris-Sud - IUT de Cachan)

Xavier Mininger was born in Strasbourg, France, in 1978. He received the B.S. and M.S. degrees in electrical engineering from Paris-XI University. He prepared his Ph.D. degree at the Ecole Normale Supérieure de Cachan, Cachan, France in the Systèmes et Applications des Technologies de l'Information et de l'Energie (SATIE) laboratory, and received the Ph.D. degree in Electrical Engineering in 2005. In 2006, he got a position of Assistant Professor at the IUT of Cachan (Université Paris-Sud) and joined the Laboratoire de Génie Electrique de Paris (LGEP). He is currently Full Professor since 2013. His main research topics consist in the numerical modeling of multiphysic problems, involving models of active materials such as piezoelectric, magnetostrictive or magnetoelectric materials. He also studies vibrations and acoustic emission of electrical machines, and solutions to avoid such problems, especially for switched reluctance motors.

Habilitation à Diriger des Recherches soutenue en novembre 2011 : "Contribution à la modélisation des couplages multiphysiques : du matériau au système". Disponible en plusieurs parties pour faciliter le téléchargement :


Thème de recherche :




(21) ACL : Articles dans des revues internationales avec comité de lecture répertoriées dans les bases de données internationales


ACL.Int.21: J. Boisson, F. Louf, X. Ojeda, X. Mininger, M. Gabsi, Low Computational-cost determination of Vibrational Behavior: Application to Five-phase Flux-Switching Permanent-Magnet Motor , IEEE Transactions on Magnetics, September 2014, pp. 0, doi: 10.1109/TMAG.2014.2359952, .


ACL.Int.20: J. Boisson, F. Louf, X. Ojeda, X. Mininger, M. Gabsi, Analytical Approach for Mechanical Resonance Frequencies of High-Speed Machines, IEEE Transactions on Industrial Electronics, Vol. 61, Issue: 6, June 2014, pp. 3081-3088, .


ACL.Int.19: T. Nguyen, X. Mininger, L. Daniel, F. Bouillault, Influence of mechanical boundary conditions on magnetoelectric sensors, IEEE Transactions on Magnetics, Vol. 49, Issue: 5, 2013, pp. 2009-2012, .


ACL.Int.18: T. Nguyen, F. Bouillault, X. Mininger, L. Daniel, The Role of the Out of Plane Component of E and H in 2D Computation of Extrinsic Magneto-Electric Problem Using E-H Formulation, IEEE Transactions on Magnetics, Vol. 48, Issue: 2, February 2012, pp. 555 - 558 , doi: 10.1109/TMAG.2011.2174041 , .


ACL.Int.17: T. Nguyen, L. Daniel, F. Bouillault, X. Mininger, Modeling of magnetoelectric sensor using finite element method, EJEE, Vol. 15, Issue: 2, 1 June 2012, pp. 273-287, .


ACL.Int.16: W. Abdelli, X. Mininger, L. Pichon, H. Trabelsi, Impact of composite materials on the shielding effectiveness of enclosures, ACES Journal, Vol. 7, Issue: 4, April 2012, pp. 369-374, .


ACL.Int.15: T. Nguyen, F. Bouillault, L. Daniel, X. Mininger, Finite element modeling of magnetic field sensors based on nonlinear magnetoelectric effect , Journal of Applied Physics, Vol. 109, Issue: 8, 21 April 2011, pp. 084904 (2011), doi: 10.1063/1.3553855, .


ACL.Int.14: T. Nguyen, X. Mininger, F. Bouillault, L. Daniel, Finite Element Harmonic Modeling of Magnetoelectric Effect , IEEE Trans. on Magnetics, Vol. 47, Issue: 5, 25 April 2011, pp. 1142 - 1145, doi: , .


ACL.Int.13: L. Idoughi, X. Mininger, F. Bouillault, L. Bernard, E. Hoang, Thermal Model with Winding Homogenization and FIT Discretization for Stator Slot, IEEE Transactions on Magnetics, Vol. 47, Issue: 12, December 2011, pp. 4822-4826, .


ACL.Int.12: L. Bernard, X. Mininger, L. Daniel, G. Krebs, F. Bouillault, M. Gabsi, Effect of stress on switched reluctance motors: a magneto-elastic finite-element approach based on multiscale constitutive laws, IEEE Transactions on Magnetics, Vol. 47, Issue: 9, 1 September 2011, pp. 2171 - 2178 , doi: 10.1109/TMAG.2011.2145387 , .


ACL.Int.11: X. Ojeda, X. Mininger, M. Gabsi, Y. Li, Optimal Design and Placement of Piezoelectric Actuators using Genetic Algorithm : Application to Switched Reluctance Machine Noise Reduction, InTech, 2011, pp. 95, doi: ISBN 978-953-307-829-8, .


ACL.Int.10: X. Mininger, N. Galopin, Y. Dennemont, F. Bouillault, 3D Finite Element Model for Magnetoelectric sensors , EPJ Applied Physics Journal, Vol. 52, Issue: 2, November 2010, pp. 23303, .


ACL.Int.9: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Modelling of magneto-electric composite structures , European Journal of Electrical Engineering, Vol. 12, Issue: 4, July 2009, pp. 461-474, .


ACL.Int.8: X. Ojeda, X. Mininger, H. Ben Ahmed, M. Gabsi, M. Lécrivain, Piezoelectric Actuator Design and Placement for Switched Reluctance Motors Active Damping, IEEE Transactions on Energy Conversion, Vol. 24, Issue: 2, June 2009, pp. 305 - 313 , url , .


ACL.Int.7: X. Ojeda, H. Hannoun, X. Mininger, M. Hilairet, M. Gabsi, C. Marchand, M. Lécrivain, Switched reluctance machine vibration reduction using a vectorial piezoelectric actuator control, EPJ Applied Physics Journal , Vol. 47, Issue: 0, 2009, pp. 31103, url , pdf .


ACL.Int.6: X. Mininger, N. Galopin, X. Ojeda, F. Bouillault, M. Gabsi, Modeling of Magnetoelastic and Piezoelectric Coupling: Application to SRM Noise Damping, IEEE Transactions on Magnetics, Vol. 45, Issue: 3, March 2009, pp. 1218-1221, url , .


ACL.Int.5: X. Mininger, E. Lefeuvre, M. Gabsi, C. Richard, D. Guyomar, Semiactive and Active Piezoelectric Vibration Controls for Switched Reluctance Machine, IEEE Transactions on Energy Conversion, Vol. 23, Issue: 1, March 2008, pp. 78-85, url , .


ACL.Int.4: X. Mininger, M. Gabsi, E. Lefeuvre, C. Richard, D. Guyomar, Compensation active des vibrations des machines à réluctance variable à l'aide d'actionneurs piézoélectriques, Revue Internationale de Génie Electrique, Vol. 11, Issue: 1, February 2008, pp. 117-138, url , .


ACL.Int.3: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Finite element modelling of magneto-electric sensors, IEEE Transactions on Magnetics, Vol. 44, Issue: 6, 2008, pp. 834-837, url , .


ACL.Int.2: X. Mininger, M. Gabsi, M. Lécrivain, E. Lefeuvre, C. Richard, D. Guyomar, F. Bouillault, Vibration damping with piezoelectric actuators for electrical motors, COMPEL, Vol. 26, Issue: 1, January 2007, pp. 98-113, url , .


ACL.Int.1: X. Mininger, N. Galopin, F. Bouillault, M. Gabsi, Analysis of electromagnetic strains on a structure such as switched reluctance machine, EPJ Applied Physics Journal , Vol. 39, Issue: 2, August 2007, pp. 191-196, url , .


(29) Communications avec actes dans un congrès international


COM.ACT.Int.29: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Evaluation and comparison of the axial SRM and radial SRM in EV, 16th Conference on Electromagnetic Field Computation (CEFC), Annecy, FR, May 2014, pp. USB, Proceedings of 16th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.28: X. Mininger, L. Bernard, L. Makong, T.T. Nguyen, L. Daniel, Modeling of 3D Magnetoelectric Devices, 16th Conference on Electromagnetic Field Computation (CEFC), Annecy, FR, May 2014, pp. USB, Proceedings of 16th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.27: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Evaluation of a switched reluctance motor with magnetic slot wedges, ICEM 2014, Berlin, DE, 2 September 2014, pp. xx, Actes de ICEM 2014, url . .


COM.ACT.Int.26: W. Abdelli, X. Mininger, L. Pichon, H. Trabelsi, Prediction of Radiation from Shielding Enclosures using Equivalent 3D High Frequency Model, 16th Conference on Electromagnetic Field Computation (CEFC), Annecy, FR, May 2014, pp. USB, Proceedings of 16th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.25: T.T. Nguyen, S. Clenet, L. Daniel, X. Mininger, F. Bouillault, Global sensitivity analysis of magneto-electric sensor model parameters, COMPUMAG 2013, Budapest, HU, 2013, pp. pp, Actes de COMPUMAG 2013, url . .


COM.ACT.Int.24: L. Bernard, X. Mininger, L. Daniel, J.V. Leite, N. Sadowski, N.J. Batistela, A Jiles-Atherton based hysteresis model for magnetic materials under complex magneto-mechanical loadings, COMPUMAG 2013, Budapest, HU, July 2013, pp. pp, Actes de COMPUMAG 2013, url . .


COM.ACT.Int.23: F. Ganet, O. Hubert, X. Mininger, F. Bouillault, Application of the magneto-mechanical coupling to the prediction of deformation of non-oriented FeSi based transformers, COMPUMAG 2013, Budapest, HU, July 2013, pp. pp, Proceedings of COMPUMAG 2013, url . .


COM.ACT.Int.22: A. Kolli, G. Krebs, X. Mininger, C. Marchand, Impact of command parameters on efficiency, torque ripple and vibrations for switched reluctance motor, XXth International Conference on Electrical Machines (ICEM 2012) , Marseille, FR, 2 September 2012, pp. 1-6, Proceedings of XXth International Conference on Electrical Machines (ICEM 2012) , url . .


COM.ACT.Int.21: L. Bernard, X. Mininger, L. Daniel, J.V. Leite, N. Sadowski, N.J. Batistela, Vectorial magnetic hysteresis model taking into account the mechanical stress for use in 2D FEM, 15th Conference on Electromagnetic Field Computation (CEFC), Oita, JP, November 2012, pp. 181, Proceedings of 15th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.20: T.T. Nguyen, L. Daniel, X. Mininger, F. Bouillault, Influence of Mechanical Boundary Conditions on Magnetoelectric Sensors, 15th Conference on Electromagnetic Field Computation (CEFC), Oita, JP, November 2012, pp. 388, Proceedings of 15th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.19: J. Boisson, F. Louf, X. Ojeda, X. Mininger, M. Gabsi, Magnetic Forces and Vibrational Behavior Analysis for Flux Switching Permanent Magnet Machines, XXth International Conference on Electrical Machines (ICEM 2012), Marseille, FR, September 2012, pp. 1-6, Actes de XXth International Conference on Electrical Machines (ICEM 2012), url . .


COM.ACT.Int.18: T.T. Nguyen, X. Mininger, F. Bouillault, L. Daniel, B. Guiffard, Modélisation du couplage magnetoelectrique associé aux forces de Lorentz pour une céramique piezoélectrique, Numelec 2012, Marseille, FR, 3 July 2012, pp. 144, Actes de Numelec 2012, url . .


COM.ACT.Int.17: W. Abdelli, C. Bizard, X. Mininger, L. Pichon, H. Trabelsi, Finite Element Analysis of Shielding Composite Enclosures , 18th International Conference on the Computation of Electromagnetic Fields, Sydney, AU, 12 July 2011, pp. pp, Proceedings of 18th International Conference on the Computation of Electromagnetic Fields, url . .


COM.ACT.Int.16: L. Idoughi, X. Mininger, L. Bernard, F. Bouillault, Determination of Thermal Model Parameters for Stator Slot Using Numerical Methods, Progress in Electromagnetics Research Symposium (PIERS) , Marrakech , MA, 21 March 2011, pp. 911-914, Proceedings of Progress in Electromagnetics Research Symposium (PIERS) , url . pdf .


COM.ACT.Int.15: T.T. Nguyen, F. Bouillault, X. Mininger, L. Daniel, Computation of Extrinsic Magneto-Electric Problem using E-H formulation, Compumag, AU, 2011, pp. 436, Actes de Compumag, url . .


COM.ACT.Int.14: X. Mininger, X. Rain, M. Hilairet, G. Krebs, C. Marchand, Modeling of SRM vibrations for two current controls, Electrimacs, Cergy-Pontoise, FR, September 2011, pp. 1-6, Proceedings of Electrimacs, url . .


COM.ACT.Int.13: T.T. Nguyen, L. Daniel, X. Mininger, F. Bouillault, Finite Element Modeling of Magnetoelectric Sensors, PIERS (Progress In Electromagnetics Research Symposium), Marrakesh, MA, 2011, pp. 849, Actes de PIERS (Progress In Electromagnetics Research Symposium), url . .


COM.ACT.Int.12: T.T. Nguyen, X. Mininger, F. Bouillault, L. Daniel, Finite Element Harmonic Modeling of Magnetoelectric Effect for Bilayer Composite , CEFC 2010 , Chicago, US, 9 May 2010, Proceedings of CEFC 2010 , url . .


COM.ACT.Int.11: X. Ojeda, X. Mininger, M. Gabsi, C. Kulcsar, H.F. Raynaud, M. Lécrivain, Design of Controllers: Vibration Damping of Switched Reluctance Machine by Piezoelectric Actuators, ELECTROMOTION, Lille, FR, July 2009, pp. 00, Actes de "ELECTROMOTION", url . .


COM.ACT.Int.10: X. Mininger, L. Daniel, L. Santandréa, L. Bernard, F. Bouillault, Magneto-elastic finite element modeling based on a multiscale approach , COMPUMAG 2009 , Florianopolis, BR, November 2009, pp. 187-188, Proceedings of COMPUMAG 2009 , url . .


COM.ACT.Int.9: L. Idoughi, X. Mininger, F. Bouillault, E. Hoang, Reduced Thermal Model for Stator Slot , COMPUMAG , Florianopolis, BR, November 2009, pp. 1058-1059, Proceedings of COMPUMAG , url . .


COM.ACT.Int.8: X. Ojeda, X. Mininger, M. Gabsi, M. Lécrivain, Noise Cancellation of 6/4 Switched Reluctance Machine by Piezoelectric Actuators: Optimal Design and Placement using Genetic Algorithm, IET PEMD, York, April 2008, pp. 00, Proceedings of "IET PEMD", url . .


COM.ACT.Int.7: X. Ojeda, X. Mininger, M. Gabsi, M. Lécrivain, Sinusoidal Feeding for Switched Reluctance Machine: Application to Vibration Damping, 18th International Conference on Electrical Machines ICEM, Vilamoura, PT, September 2008, pp. 00, Proceedings of "18th International Conference on Electrical Machines ICEM", url . .


COM.ACT.Int.6: X. Mininger, N. Galopin, Y. Dennemont, F. Bouillault, Modélisation Eléments Finis 3D de Capteurs Magnétoélectriques, NUMELEC'08, 6ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme, Liège, BE, December 2008, pp. 00, Proceedings of "NUMELEC'08, 6ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme", url . .


COM.ACT.Int.5: X. Mininger, N. Galopin, X. Ojeda, F. Bouillault, M. Gabsi, Modeling of magnetoelastic and piezoelectric coupling: Application to SRM noise damping, 13th Conference on Electromagnetic Field Computation, Athènes, May 2008, pp. 00, Proceedings of "13th Conference on Electromagnetic Field Computation", url . .


COM.ACT.Int.4: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Finite Element Modelling of Magneto-Electric Sensors, COMPUMAG, Aachen, FR, June 2007, pp. 00, Actes de "COMPUMAG", url . .


COM.ACT.Int.3: X. Ojeda, X. Mininger, M. Gabsi, M. Lécrivain, Noise reduction by piezoelectric active control on high speed switched reluctance drives, IEEE - Industry Applications Society, New Orleans, US, September 2007, pp. 00, Proceedings of "IEEE - Industry Applications Society", url . .


COM.ACT.Int.2: X. Ojeda, X. Mininger, M. Gabsi, S. Hlioui, M. Lécrivain, Active piezoelectric vibration control for high speed switched reluctance, 12th European Conference on Power Electronics and Applications (EPE), Aalborg, September 2007, pp. 00, Proceedings of "12th European Conference on Power Electronics and Applications (EPE)", url . .


COM.ACT.Int.1: X. Mininger, N. Galopin, F. Bouillault, M. Besbes, M. Gabsi, Modélisation des déformations électromagnétiques d'une structure type stator de machine à réluctance variable, NUMELEC'06, 5ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme, Lille, FR, November 2006, pp. 00, Actes de "NUMELEC'06, 5ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme", url . .


(8) Communications avec actes dans un congrès national


COM.Act.Nat.8: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Reduction des ondulations de couple et des efforts radiaux dans une machine a reluctance variable, Symposium de Génie Electrique (SGE), Cachan, FR, July 2014, pp. 1-8, Actes de Symposium de Génie Electrique (SGE), url . .


COM.Act.Nat.7: T.T. Nguyen, L. Daniel, F. Bouillault, X. Mininger, Modélisation d’un capteur magnétoélectrique par la méthode des éléments finis, MGE, Montpellier, FR, 2010, pp. 2, Actes de MGE, url . .


COM.Act.Nat.6: L. Idoughi, X. Mininger, F. Bouillault, Modèle Thermique Equivalent d’une Encoche Statorique basé sur la Méthode FIT , Electrotechnique du Futur , Compiègne, FR, 24 September 2009, pp. 00, url . .


COM.Act.Nat.5: L. Idoughi, X. Mininger, F. Bouillault, Electrical machines model, 3ème Symposium des Technologies de l'Avion Plus Électrique (forum SPEC), Every, FR, 18 November 2009, pp. 14, Proceedings of 3ème Symposium des Technologies de l'Avion Plus Électrique (forum SPEC), url . .


COM.Act.Nat.4: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Structures composites magnéto-électriques, 4 éme Colloque Matériaux du Génie Electrique (MGE 2008), Toulouse, FR, May 2008, pp. 00, Actes de "4 éme Colloque Matériaux du Génie Electrique (MGE 2008)", url . .


COM.Act.Nat.3: X. Ojeda, X. Mininger, M. Gabsi, M. Lécrivain, Utilisation d'Actionneurs Piézoélectriques en vue de la Réduction des Vibrations dans les MRV, Conférence sur les Sciences et Applications des Matériaux Electroactifs - CSAME 2007, Toulouse, FR, September 2007, pp. 00, Actes de "Conférence sur les Sciences et Applications des Matériaux Electroactifs - CSAME 2007", url . .


COM.Act.Nat.2: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Effet Magnéto-Electrique pour Capteur de Position, Conférence sur les Sciences et Applications des Matériaux Electroactifs - CSAME 2007, Toulouse, FR, September 2007, pp. 00, Actes de "Conférence sur les Sciences et Applications des Matériaux Electroactifs - CSAME 2007", url . .


COM.Act.Nat.1: N. Galopin, X. Mininger, F. Bouillault, L. Daniel, Modélisation par éléments finis de dispositifs basés sur l'utilisation de matériaux actifs, Matériaux 2006, Dijon, FR, November 2006, pp. 00, Actes de "Matériaux 2006", url . .