Imprimer cette page

Claude Marchand

Untitled document

Professeur des Universités (Université Paris Sud)

Claude Marchand is graduated from the Ecole Normale Supérieure de Cachan and he received the Ph.D. degree from Université Paris VI in 1991. Since 1988 he is with the Laboratoire de Génie Electrique de Paris (LGEP). From 1994 to 2000, he was Assistant Professor at the Institut Universitaire de Technologie of Cachan (Université Paris-Sud). Since 2000 he is Professor at the Université Paris-Sud. He is head of the LGEP research team "Design, Control and Diagnosis" on electromagnetic systems. His research interests are in eddy current nondestructive testing and in design and control of electrical actuators.

Thème de recherche :



(44) ACL : Articles dans des revues internationales avec comité de lecture répertoriées dans les bases de données internationales


ACL.Int.44: M. Hage-Hassan, G. Remy, G. Krebs, C. Marchand, Radial output space mapping for electromechanical systems design, COMPEL, Vol. 33, Issue: 3, April 2014, pp. 965-975, doi: http://dx.doi.org/10.1108/COMPEL-05-2013-0192, .


ACL.Int.43: Y. Le Bihan, J. Pavo, C. Marchand, Partial least square regression: an analysis tool for quantitative non-destructive testing, The European Physical Journal Applied Physics, Vol. 67, Issue: 3, September 2014, pp. 7 pages, doi: 10.1051/epjap/2014130487, .


ACL.Int.42: S. Diao, D. Diallo, Z. Makni, C. Marchand, J. Bisson, A Differential Algebraic Estimator for Sensorless Permanent-Magnet Synchronous Machine Drive, IEEE Transactions on Energy Conversion, 2014, pp. 1-9, doi: 10.1109/TEC.2014.2331080, .


ACL.Int.41: C. Larouci, K. Ejjabraoui, P. Lefranc, C. Marchand, Placement Optimization of Power Components in Static Power Converters under Spatial and Thermal Constraints, Journal of Power Electronics, Vol. 12, Issue: 2, 2012, pp. 368 – 376, .


ACL.Int.40: C. Larouci, K. Ejjabraoui, P. Lefranc, C. Marchand, Placement Optimization of Power Components in Static Power Converters under Spatial and Thermal Constraints, Journal of Power Electronics, Vol. 12, Issue: 2, 2012, pp. 368 – 376, .


ACL.Int.39: K. Ejjabraoui, C. Larouci, P. Lefranc, C. Marchand, Pre-sizing methodology of dc-dc converters using optimization under multi-physic constraints; Application to a buck converter, IEEE Transactions on Industrial Electronics, Vol. 59, Issue: 7, 2012, pp. 2781 - 2790, .


ACL.Int.38: S. Phrakonkham, G. Remy, D. Diallo, C. Marchand, Pico vs Micro Hydro based Optimized Sizing of a Centralized AC Coupled Hybrid Source for villages in Laos, Elsevier ScienceDirect Energy Procedia, Vol. 14, March 2012, pp. 1087-1092, pdf .


ACL.Int.37: A. De Bernardinis, E. Frappé, O. Bethoux, C. Marchand, G. Coquery, Multi-port power converter for segmented PEM fuel cell in transport application: Simulation with fault tolerant strategy, European Physical J. Applied Physics. (EPJ-AP). Ed.EDP Sciences, Vol. 58, Issue: 2, 9 May 2012, pp. 20901_1-15, doi: 10.1051/epjap/2012120056, url , pdf .


ACL.Int.36: H. Hannoun, M. Hilairet, C. Marchand, Experimental validation of a switched reluctance machine operating in continuous conduction mode, IEEE Transactions on Vehicular Technology, Vol. 60, Issue: 4, 2011, pp. 1453-1460, .


ACL.Int.35: O. Bethoux, C. Marchand, E. Frappé, A. De Bernardinis, G. Coquery, PEM fuel cell fault detection and identification using differential method: simulation and experimental validation, European Physical J. Applied Physics. (EPJ-AP). Ed.EDP Sciences, Vol. 54, Issue: 2, 18 May 2011, pp. 23412_1-11, doi: 10.1051/epjap/2011100277, pdf .


ACL.Int.34: X. Jannot, J. Vannier, C. Marchand, M. Gabsi, J. Saint-Michel, D. Sadarnac, Multiphysic Modeling of a High-Speed Interior Permanent-Magnet Synchronous Machine for a Multiobjective Optimal Design, IEEE Transactions on Energy Conversion, Vol. 26, Issue: 2, June 2011, pp. 457-467, .


ACL.Int.33: F. Dadouche, O. Bethoux, M. Gueunier-Farret, E. Johnson, P. Roca I Cabarrocas, C. Marchand, J. Kleider, Geometrical optimization and electrical performance comparison of thin-film tandem structures based on pm-Si:H and μc-Si:H using computer simulation, EPJAP Photovoltaics, Vol. 2, 1 April 2011, pp. 20301, doi: 10.1051/epjpv/2011001, pdf .


ACL.Int.32: R. Talj, T. Azib, O. Bethoux, G. Remy, C. Marchand, E. Berthelot, Parameter analysis of PEM fuel cell hysteresis effects for transient load use, The European Physical Journal of Applied Physics, Vol. 54, Issue: 2, 18 May 2011, pp. 1-12, doi: 10.1051/epjap/2011100266, url , pdf .


ACL.Int.31: T. Azib, O. Bethoux, G. Remy, C. Marchand, E. Berthelot, Système hybride à pile à combustible et supercondensateur : Structures, contrôle-commande et gestion d’énergie, European journal of electrical engineering, Vol. 14, Issue: 2, 1 November 2011, pp. 363-382, doi: 10.3166/ejee.14.363-382, url , pdf .


ACL.Int.30: H. Hannoun, M. Hilairet, C. Marchand, “ High performance current control of a switched reluctance machine based on a gain-scheduling PI controller, Control engineering practice, Vol. 19, Issue: 11, 2011, pp. 1377-1386, pdf .


ACL.Int.29: T. Azib, O. Bethoux, G. Remy, C. Marchand, Saturation Management of a Controlled Fuel-Cell/Ultracapacitor Hybrid Vehicle , Vehicular Technology, IEEE Transactions on, Vol. 60, Issue: 8, 8 December 2011, pp. 4127-4138, doi: 10.1109/TVT.2011.2165092, pdf .


ACL.Int.28: S. Phrakonkham, J. Lechenadec, D. Diallo, G. Remy, C. Marchand, Reviews on Micro-Grid Configuration and Dedicated Hybrid System Optimization Software Tools: Application to Laos, Engineering Journal (IEEE), Vol. 14, Issue: 3, 1 July 2010, pp. 15-34, doi: doi:10.4186/ej.2010.14.3.15, url , pdf .


ACL.Int.27: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Modeling of thin structures in eddy current testing with shell elements, EPJ. Applied Physics, Vol. 52, Issue: 2, 2010, pp. 23303.p1-23308.p5, .


ACL.Int.26: T. Azib, O. Bethoux, G. Remy, C. Marchand, E. Berthelot, An Innovative Control Strategy of a Single Converter for Hybrid Fuel Cell/Supercapacitors Power Source , IEEE Transactions on Industrial Electronics, Vol. 57, Issue: 12, 1 December 2010, pp. 4024-4031, doi: 10.1109/TIE.2010.2044123, url , pdf .


ACL.Int.25: H. Hannoun, M. Hilairet, C. Marchand, Design of a SRM speed control strategy for a wide range of operating speed, IEEE Transactions on Industrial Electronics, 2010, pp. 1-8, .


ACL.Int.24: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Electromagnetic Field Computation in Magnetic and Conductive Thin sheets , Sensor Letters, Vol. 7, Issue: 3, June 2009, pp. 480-485, url , pdf .


ACL.Int.23: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Study of the Degrees of Freedom Management of Dual Formulations for the Modelling of Thin Cracks in Eddy Current Testing, Sensor Letters, Vol. 7, Issue: 5, June 2009, pp. 475–479, url , .


ACL.Int.22: X. Ojeda, H. Hannoun, X. Mininger, M. Hilairet, M. Gabsi, C. Marchand, M. Lécrivain, Switched reluctance machine vibration reduction using a vectorial piezoelectric actuator control, EPJ Applied Physics Journal , Vol. 47, Issue: 0, 2009, pp. 31103, url , pdf .


ACL.Int.21: C. Ravat, P. Joubert, Y. Le Bihan, C. Marchand, M. Woytazik, E. Dufour-Gergam, Non-destructive evaluation of small defects using an eddy current microcoil sensor array, Sensor Letters, Vol. 7, Issue: 3, June 2009, pp. 400–405 , .


ACL.Int.20: C. Delpha, D. Diallo, M. Benbouzid, C. Marchand, Application of Classification Methods in Fault Detection and Diagnosis of Inverter fed Induction Machine Drive: A Trend Towards Reliability,, European Physical Journal - Applied Physics, Vol. 45, Issue: 0, August 2008, pp. 245-251, url , .


ACL.Int.19: Y. Le Bihan, J. Pavo, C. Marchand, Characterization of small cracks in eddy current testing, The European Physical Journal - Applied Physics, Vol. 43, Issue: 2, June 2008, pp. 231-237, .


ACL.Int.18: C. Ravat, Y. Le Bihan, P. Joubert, C. Marchand, Comparative Study of Coil Arrangements for the EC Testing of Small Surface Breaking Defects, Studies in Applied Electromagnetics and Mechanics, Vol. 31, Issue: 0, 2008, pp. 288-293, url , .


ACL.Int.17: M. Bensetti, Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Adaptive mesh refinement and probe signal calculation in eddy current NDT by complementary formulations, IEEE Transactions on Magnetics, Vol. 44, Issue: 6, June 2008, pp. 1646 - 1649, url , pdf .


ACL.Int.16: Z. Makni, M. Besbes, C. Marchand, Multiphysics Design Methodology of Permanent-Magnet Synchronous Motors, IEEE Transactions on Vehicular Technology, Vol. 56, Issue: 4, July 2007, pp. 1524-1530, url , .


ACL.Int.15: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Thin Crack Modeling in ECT with Combined Potential Formulations , IEEE Transactions on Magnetics, Vol. 43, Issue: 4, April 2007, pp. 1789-1792, url , .


ACL.Int.14: Z. Makni, M. Besbes, C. Marchand, A coupled electromagnetic - thermal model for the design of electric machines. Association of analytical and numerical approaches, COMPEL, Vol. 26, Issue: 1, 2007, pp. 201-213, url , .


ACL.Int.13: L. Santandréa, Y. Le Bihan, C. Marchand, Numerical evaluation of a buried electrode system for glass furnace wall characterization, European Physical Journal - Applied Physics, Vol. 39, Issue: 2, August 2007, pp. 179-183, url , .


ACL.Int.12: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Modelling of a thin crack in ECT using a ψ-formulation with Whitney elements, International Journal of Applied Electromagnetics and Mechanics, IOS Press, Vol. 25, Issue: 0, 2007, pp. 185-188, url , .


ACL.Int.11: M. Rekik, M. Besbes, C. Marchand, B. Multon, S. Loudot, D. Lhotellier, Improvement in the field-weakening performance of switched reluctance machine with continuous mode, IET, Electric Power Applications, Vol. 0, Issue: 0, September 2007, pp. 785 - 792, url , .


ACL.Int.10: M. Bensetti, Y. Le Bihan, C. Marchand, D. Premel, Non-destructive evaluation of layered planar media using MLP and RBF neural networks, Studies in Applied Electromagnetics and Mechanics, Vol. 0, Issue: 0, 2006, pp. , url , .


ACL.Int.9: J. Kappatou, C. Marchand, A. Razek, Finite element analysis for the diagnosis of broken bars in 3-phase induction machines, Studies in Applied Electromagnetics and Mechanics, Vol. 27, Issue: 0, 2006, pp. 348-353, url , .


ACL.Int.8: E. De Cecco, Z. Makni, C. Marchand, M. Besbes, Sensitivity study with fractional factorial design and its integration in a CAD package for electromechanical systems, Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Vol. 27, Issue: 0, 2006, pp. 40-45, url , .


ACL.Int.7: Y. Le Bihan, J. Pavo, C. Marchand, Study and experimental validation of the calculation of the ECT signal induced by a minute crack using a FEM-BIM combination, NDT & E International, Vol. 39, Issue: 6, September 2006, pp. 476-486, url , .


ACL.Int.6: Y. Le Bihan, J. Pavo, M. Bensetti, C. Marchand, Computational Environment for the Fast Calculation of ECT Probe Signal , IEEE Transactions on Magnetics, Vol. 42, Issue: 4, April 2006, pp. 1411-1414, url , .


ACL.Int.5: M. Bensetti, Y. Le Bihan, C. Marchand, Development of an hybrid 3D finite element method for the modeling of micro-coil sensors and actuators, Sensors and Actuators A: Physical, Vol. 0, Issue: 0, 2006, pp. , url , .


ACL.Int.4: M. Bensetti, Y. Le Bihan, C. Marchand, J. Pavo, C. Tassetti, G. Lissourgues, E. Dufour-Gergam, J. Gilles, An hybrid finite element method for the modeling of micro-inductors, IEEE Transactions on Magnetics, Vol. 41, Issue: 5, May 2005, pp. , url , .


ACL.Int.3: Y. Le Bihan, J. Pavo, C. Marchand, Calculation of the ECT signal of a minute crack by a FEM-BIM hybrid method, European Physical Journal - Applied Physics, Vol. 28, Issue: 3, December 2004, pp. 355-360, url , .


ACL.Int.2: E. De Cecco, C. Marchand, M. Besbes, Software Tool for Conception and Optimization of Permanent Magnet Synchronous Machines, International Journal of Applied Electromagnetics and Mechanics, IOS Press, Vol. 0, Issue: 0, 2004, pp. 643-646, url , .


ACL.Int.1: M. Bensetti, Y. Le Bihan, C. Marchand, J. Pavo, Deposit characterization by eddy current nondestructive evaluation, International Journal of Applied Electromagnetics and Mechanics, IOS Press, Vol. 19, Issue: 0, 2004, pp. 537-540, url , .


(1) ACL : Articles dans des revues nationales avec comité de lecture répertoriées dans les bases de données internationales


ACL.Nat.1: O. Maloberti, G. Krebs, C. Marchand, D. Condamin, L. Kobylanski, E. Bomme, Modélisation électromagnétique et thermique d'un moteur à flux axial et à aimants permanents, Revue Internationale de Génie Electrique, Vol. 14, February 2011, pp. 183-214, .


(87) Communications avec actes dans un congrès international


COM.ACT.Int.87: S. Diao, D. Diallo, Z. Makni, C. Marchand, J.F. Bisson, Current Sensor Fault Diagnosis in the Stationary Frame for PMSM Drive in Automotive Systems, 9th Ninth International Conference on Ecological Vehicles and Renewable Energies , Monaco, FR, 27 March 2014, pp. 1-7, Proceedings of 9th Ninth International Conference on Ecological Vehicles and Renewable Energies , url . .


COM.ACT.Int.86: F. Roy, F. Ossart, C. Marchand, An optimal energetic approach for systemic design of hybrid powertrain, IEEE Vehicle Power Propulsion Conference 2014, Coimbra, PT, October 2014, pp. Session S5.5, Proceedings of IEEE Vehicle Power Propulsion Conference 2014, url . pdf .


COM.ACT.Int.85: M. Hage-Hassan, G. Krebs, G. Remy, C. Marchand, Multi-objective Optimization of an Axial-flux PM Actuator with Space Mapping Technique, 9th IET International Conference on Computation in Electromagnetics (CEM 2014) , Londre, GB, July 2014, pp. 117, Actes de 9th IET International Conference on Computation in Electromagnetics (CEM 2014) , url . .


COM.ACT.Int.84: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Evaluation of a switched reluctance motor with magnetic slot wedges, ICEM 2014, Berlin, DE, 2 September 2014, pp. xx, Actes de ICEM 2014, url . .


COM.ACT.Int.83: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Evaluation and comparison of the axial SRM and radial SRM in EV, 16th Conference on Electromagnetic Field Computation (CEFC), Annecy, FR, May 2014, pp. USB, Proceedings of 16th Conference on Electromagnetic Field Computation (CEFC), url . .


COM.ACT.Int.82: P. Estival, G. Krebs, C. Marchand, R. Sehab, B. Barbedette, Pre-Sizing of Permanent Magnet Synchronous Machine under Mass Constraints, 6th International Conference on Recent Advances in Aerospace Actuation Systems and Components, Toulouse, FR, 1 April 2014, pp. xx, Actes de 6th International Conference on Recent Advances in Aerospace Actuation Systems and Components, url . .


COM.ACT.Int.81: S. Diao, D. Diallo, Z. Makni, C. Marchand, J.F. Bisson, Sensor Fault Diagnosis for Improving the Availability of Electrical Drives, 39th Conference on IEEE Industrial Electronics Society (IECON), Vienne, AT, 13 November 2013, pp. 3108 - 3113 , Proceedings of 39th Conference on IEEE Industrial Electronics Society (IECON), url . .


COM.ACT.Int.80: M. Hage-Hassan, G. Krebs, C. Marchand, A simplified time stepping nonlinear mesh based reluctance network for machine design , IEEE International Electric Machines and Drives Conference, Chicago, US, 12 May 2013, pp. pp, Actes de IEEE International Electric Machines and Drives Conference, url . pdf .


COM.ACT.Int.79: S. Diao, D. Diallo, Z. Makni, C. Marchand, J.F. Bisson, A differential algebraic approach for position/speed estimation in PMSM , 9th International Electric Machines & Drives Conference (IEMDC) , Chicago, US, 15 May 2013, pp. 1149 - 1154 , Proceedings of 9th International Electric Machines & Drives Conference (IEMDC) , url . .


COM.ACT.Int.78: F. Roy, F. Ossart, C. Marchand, Hybrid powertrain design using optimal control strategies, Electric Vehicle Symposium EVS27, Barcelone, ES, November 2013, pp. , Proceedings of Electric Vehicle Symposium EVS27, url . pdf .


COM.ACT.Int.77: F. Roy, C. Gazo, F. Ossart, C. Marchand, TRIZ methodology adapted to hybrid powertrains performances evaluation, TRIZ Future Conference 2013, Paris, FR, October 2013, pp. 283-292, Proceedings of TRIZ Future Conference 2013, url . pdf .


COM.ACT.Int.76: M. Hage-Hassan, G. Remy, G. Krebs, C. Marchand, Radial output space mapping for electromechanical systems design , 12th International Workshop on Optimization and Inverse Problems in Electromagnetism, Gand, BE, 19 September 2012, pp. 22-23, Proceedings of 12th International Workshop on Optimization and Inverse Problems in Electromagnetism, url . pdf .


COM.ACT.Int.75: A. De Bernardinis, E. Frappé, O. Bethoux, C. Marchand, G. Coquery, Electrical architecture for high power segmented PEM Fuel Cell in vehicle application, REVET 2012 The First International Conference on Renewable Energies and VEhicular Technology , Hammamet, TN, March 2012, pp. 15 - 22, Actes de REVET 2012 The First International Conference on Renewable Energies and VEhicular Technology , url . pdf .


COM.ACT.Int.74: A. Kébé, S. Phrakonkham, G. Remy, D. Diallo, C. Marchand, Optimal Design of a renewable energy power plant for an isolated site in Senegal , IEEE International Conference on Renewable Energies and Vehicular Technology,(REVET 2012), Hammameth, TN, 26 March 2012, pp. 336-343, Proceedings of IEEE International Conference on Renewable Energies and Vehicular Technology,(REVET 2012), url . pdf .


COM.ACT.Int.73: M. Chabchoub, I. Ben Salah, G. Krebs, R. Neji, C. Marchand, PMSM cogging torque reduction: Comparison between different shapes of magnet , International Conference on Renewable Energies and Vehicular Technology (REVET), 2012 , Sfax, TN, 26 March 2012, pp. 1-6, Proceedings of International Conference on Renewable Energies and Vehicular Technology (REVET), 2012 , url . .


COM.ACT.Int.72: G. Krebs, E. De Cecco, C. Marchand, Design approach of an axial flux motor for electrical powertrain vehicle , XXth International Conference on Electrical Machines (ICEM 2012), Marseille, FR, 2 September 2012, pp. 1-6, Proceedings of XXth International Conference on Electrical Machines (ICEM 2012), url . .


COM.ACT.Int.71: M. Belhadi, A. Kolli, G. Krebs, C. Marchand, Evaluation of Torque-Speed Curve of Switched Reluctance Motor with Segmental Rotor, XXth International Conference on Electrical Machines (ICEM 2012), Marseille, FR, 2 September 2012, pp. 1-6, Proceedings of XXth International Conference on Electrical Machines (ICEM 2012), url . .


COM.ACT.Int.70: A. Kolli, G. Krebs, X. Mininger, C. Marchand, Impact of command parameters on efficiency, torque ripple and vibrations for switched reluctance motor, XXth International Conference on Electrical Machines (ICEM 2012) , Marseille, FR, 2 September 2012, pp. 1-6, Proceedings of XXth International Conference on Electrical Machines (ICEM 2012) , url . .


COM.ACT.Int.69: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Evaluation of a Planar Coil Model Using Shell Elements, 29th Progress In Electromagnetics Research Symposium, MA, 20 March 2011, pp. 1, Proceedings of 29th Progress In Electromagnetics Research Symposium, url . .


COM.ACT.Int.68: E. De Cecco, G. Krebs, C. Marchand, Design of electric powertrains for vehicles using driving cycles, Compumag, sydney, AU, July 2011, pp. 1-2, Proceedings of Compumag, url . .


COM.ACT.Int.67: E. Frappé, A. De Bernardinis, O. Bethoux, C. Marchand, G. Coquery, A soft-switching four-port DC-DC converter for segmented PEM fuel cell power management in vehicle application , VPPC 2011, Chicago, US, 6 September 2011, pp. 1 - 6 , Proceedings of VPPC 2011, url . pdf .


COM.ACT.Int.66: M. Khanchoul, G. Krebs, C. Marchand, Improvement of a permanent magnet synchronous motor for an electrical compressor , International Conference of the IEEE Industrial Electronics Society (IECON), Melbourne, AU, 7 November 2011, pp. 1-6, Proceedings of International Conference of the IEEE Industrial Electronics Society (IECON), url . .


COM.ACT.Int.65: M. Khanchoul, G. Krebs, C. Marchand, F. Alves, A. Battelier, M. Roze, Design and Study of a Permanent Magnet Synchronous Motor for an Electric Compressor, Progress In Electromagnetics Research Symposium, Marrakech, MA, 20 March 2011, pp. 171-175, Proceedings of Progress In Electromagnetics Research Symposium, url . .


COM.ACT.Int.64: X. Mininger, X. Rain, M. Hilairet, G. Krebs, C. Marchand, Modeling of SRM vibrations for two current controls, Electrimacs, Cergy-Pontoise, FR, September 2011, pp. 1-6, Proceedings of Electrimacs, url . .


COM.ACT.Int.63: M. Kamali Nejad, T. Azib, G. Remy, O. Bethoux, C. Marchand, Optimization of a Power Electronic Structure for Hybrid Fuel Cell/Ultracapacitors Vehicle, Vehicle Power and Propulsion Conference, IEEE VPPC2010, Lille, FR, 3 September 2010, pp. 1-6, Proceedings of Vehicle Power and Propulsion Conference, IEEE VPPC2010, url . pdf .


COM.ACT.Int.62: Y. Le Bihan, C. Marchand, J. Pavo, G. Krebs, Partial Least Square Regression for Quantitative Evaluation of Small Anomalies in Non-Destructive Testing, Conference on Electromagnetic Field Computation (CEFC 2010), Chicago, US, 9 May 2010, pp. 1-4, Proceedings of Conference on Electromagnetic Field Computation (CEFC 2010), url . .


COM.ACT.Int.61: E. Frappé, A. De Bernardinis, O. Bethoux, C. Marchand, G. Coquery, Fault detection and identification using simple and non-intrusive on-line monitoring techniques for PEM fuel cell, International Symposium on Industrial Electronics ISIE, Bary, IT, July 2010, pp. 2029 - 2034 , Actes de International Symposium on Industrial Electronics ISIE, url . pdf .


COM.ACT.Int.60: E. Frappé, A. De Bernardinis, O. Bethoux, C. Marchand, G. Coquery, Corrective Action with Power Converter for Faulty Multiple Fuel Cells Generator used in Transportation, 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Lille 2010 , Lille, FR, September 2010, pp. 1-6, Actes de 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Lille 2010 , url . pdf .


COM.ACT.Int.59: T. Azib, R. Talj, O. Bethoux, C. Marchand, Sliding Mode Control and Simulation of a Hybrid Fuel-Cell Ultracapacitor Power System, IEEE International Symposium Industrial Electronics, ISIE’10, Bari, IT, 1 July 2010, pp. 3425-3430, Proceedings of IEEE International Symposium Industrial Electronics, ISIE’10, url . pdf .


COM.ACT.Int.58: K. Ejjabraoui, C. Larouci, P. Lefranc, C. Marchand, Pre-sizing of DC-DC converters by optimization under constraints. Influence of the control constraint on the optimization results, ICIT’10, IEEE International Conference on Industrial Technology, Vina del Mare Valparaiso, CL, 14 March 2010, pp. 800-806, Proceedings of ICIT’10, IEEE International Conference on Industrial Technology, url . pdf .


COM.ACT.Int.57: T. Azib, G. Remy, O. Bethoux, C. Marchand, Control strategy with saturation management of a Fuel Cell-ultracapacitors hybrid vehicule, Vehicle Power and Propulsion Conference, IEEE VPPC2010, Lille, FR, 3 September 2010, pp. 1-6, Proceedings of Vehicle Power and Propulsion Conference, IEEE VPPC2010, url . pdf .


COM.ACT.Int.56: L. Santandréa, Y. Choua, A. Ospina Vargas, Y. Le Bihan, C. Marchand, Analyse of different programming solutions adapted to block matrix type in electromagnetic modelling, COMPUMAG, FLorianapolis, BR, 22 November 2009, pp. 00, Actes de COMPUMAG, url . .


COM.ACT.Int.55: T. Azib, O. Bethoux, C. Marchand, E. Berthelot, Supercapacitors for Power Assistance in Hybrid Power Source with Fuel Cell , IEEE-IECON 2009, the 35th Annual Conference of the IEEE Industrial Electronics Society , PORTO, PT, 3 November 2009, pp. 11-18, Proceedings of IEEE-IECON 2009, the 35th Annual Conference of the IEEE Industrial Electronics Society , url . pdf .


COM.ACT.Int.54: F. Dadouche, O. Bethoux, M.E. Gueunier-Farret, E.V. Johnson, P. Roca I Cabarrocas, C. Marchand, J.P. Kleider, Comparative study of thin-film silicon cell tandem structures pm-Si:H/µc-Si:H in system association prospect, European Materials Research Society – EMRS Spring Meeting, Strasbourg, FR, 2009, pp. 000, Proceedings of European Materials Research Society – EMRS Spring Meeting, url . .


COM.ACT.Int.53: S. Phrakonkham, J.Y. Lechenadec, D. Diallo, C. Marchand, Optimisation Software Tool Review and the Need of Alternative Means for Handling the Problems of Excess Energy and Mini-Grid Configuration: A Case Study from Laos, ASEAN Symposium on Power and Energy Systems, Hua Hin, TH, 28 September 2009, pp. 53-58, Proceedings of ASEAN Symposium on Power and Energy Systems, url . pdf .


COM.ACT.Int.52: F. Dadouche, O. Bethoux, E. Labouré, E.V. Johnson, P. Roca I Cabarrocas, C. Marchand, J.P. Kleider, A system study on silicon thin-film pm-Si:H/µc-Si:H tandem cell structure, 24th European Photovoltaic Solar Energy Conference, Hambourg, DE, September 2009, pp. 3699-3705, Proceedings of European Photovoltaic Solar Energy Conference – EU PVSEC, url . pdf .


COM.ACT.Int.51: T. Azib, O. Bethoux, G. Remy, C. Marchand, Structure and Control Strategy for a Parallel Hybrid Fuel Cell/Supercapacitors Power Source , IEEE-VPPC 2009, The 5th IEEE Vehicle Power and Propulsion Conference, (Best Paper Award), Dearborn, US, 7 September 2009, pp. 1858-1863, Proceedings of IEEE-VPPC 2009, The 5th IEEE Vehicle Power and Propulsion Conference, Best Paper Award , url . pdf .


COM.ACT.Int.50: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Planar Coil Model using Shell Elements Applied to an Eddy-Current Non-Destructive Testing , 17 Conference on the computation of electromagnetics fields, COMPUMAG 2009 , Florianopolis, BR, December 2009, pp. 873-874, Actes de 17 Conference on the computation of electromagnetics fields, COMPUMAG 2009 , url . pdf .


COM.ACT.Int.49: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Mesh Refinement in Eddy Current Testing with Separated T-R probes , COMPUMAG, Florianópolis, BR, 22 November 2009, pp. 1048-1049, Proceedings of COMPUMAG, url . pdf .


COM.ACT.Int.48: G. Krebs, C. Marchand, Accounting of axial component field in double excited motors using 2D-FEM , 8th International Symposium on Electric and Magnetic Fields, EMF 2009, Mondovi, IT, 26 May 2009, pp. pp.1-8, Actes de 8th International Symposium on Electric and Magnetic Fields, EMF 2009, url . .


COM.ACT.Int.47: M. Hilairet, H. Hannoun, C. Marchand, Design of an optimized SRM control architecture based on a hardware/software partitioning, IEEE Industrial Electronics, IECON 2009, Porto, PT, November 2009, pp. 1-6, Proceedings of IEEE Industrial Electronics, IECON 2009, url . pdf .


COM.ACT.Int.46: K. Ejjabraoui, C. Larouci, P. Lefranc, C. Marchand, A new pre-sizing approach of DC-DC converters application to a Boost converter for the automotive domain, IECON'09 Annual Conference of the IEEE Inductrial Electronics Society, Porto, PT, 5 November 2009, pp. 00, Proceedings of IECON'09 Annual Conference of the IEEE Inductrial Electronics Society, url . .


COM.ACT.Int.45: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Modélisation du contrôle non destructif par courants de Foucault de milieux de faible épaisseur, 6ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2008), Liège, BE, December 2008, pp. 66-67, Actes de 6ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2008), url . .


COM.ACT.Int.44: A. Ospina Vargas, Y. Le Bihan, L. Santandréa, C. Marchand, Electromagnetic field computation in magnetic and conductive thin sheets, European Magnetic Sensors and Actuators, Caen, NONE, June 2008, pp. 00, Proceedings of "European Magnetic Sensors and Actuators", url . .


COM.ACT.Int.43: C. Ravat, P.Y. Joubert, Y. Le Bihan, C. Marchand, Non destructive evaluation of small defects using an eddy current microcoil sensor array , European Magnetic Sensors & Actuators Conference EMSA 2008 Conference, Caen, FR, July 2008, pp. 00, Actes de "European Magnetic Sensors & Actuators Conference EMSA 2008 Conference", url . .


COM.ACT.Int.42: H. Hannoun, M. Hilairet, C. Marchand, Speed control of a switched reluctance machine in continuous conduction mode, International conference on electrical machines, ICEM, , PT, 2008, pp. 00, Proceedings of "International conference on electrical machines, ICEM", url . .


COM.ACT.Int.41: X. Liu, D. Diallo, C. Marchand, Design methodology of fuel cell electric vehicle power system, IEEE the 2008 International Conference on Electrical Machines, Villamoura, PT, September 2008, pp. 00, Proceedings of "IEEE the 2008 International Conference on Electrical Machines", url . .


COM.ACT.Int.40: H. Hannoun, M. Hilairet, C. Marchand, Comparison of instantaneous and average torque, IEEE International Symposium on Industrial Electronics ISIE, Cambridge, GB, 2008, pp. 00, Proceedings of "IEEE International Symposium on Industrial Electronics ISIE", pdf .


COM.ACT.Int.39: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Evaluation of finite elements models of cracks for ECT, NUMELEC, Liège , BE, December 2008, pp. 00, Proceedings of "NUMELEC", .


COM.ACT.Int.38: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Study of the DOF management of dual formulations for the modelling of thin cracks in ECT , European Magnetic Sensors & Actuators Conference EMSA 2008 Conference, Caen, FR, July 2008, pp. 00, Actes de "European Magnetic Sensors & Actuators Conference EMSA 2008 Conference", url . .


COM.ACT.Int.37: X. Liu, H. Hannoun, D. Diallo, C. Marchand, Development of a software tool dedicated to EV or HEV structure analysis: Comparison of two electric power trains for a parallel HEV, International Conference on Ecologic Vehicles & Renewable Energies, Monaco, MC, March 2007, pp. 00, Proceedings of "International Conference on Ecologic Vehicles & Renewable Energies", url . .


COM.ACT.Int.36: Y.L. Allaert, T. Henneron, S. Clenet, A. Abakar, C. Marchand, Calculation of induction machine external field using both magnetodynamic potential formulations, COMPUMAG, Aix, FR, June 2007, pp. 00, Actes de "COMPUMAG", url . .


COM.ACT.Int.35: Z. Makni, M. Besbes, C. Marchand, A Hybrid Analytical-Numerical Methodology for Optimal Design of Electromagnetic Actuators: Application to PMSM, EVER, International Conference on Electric Vehicles and Renewable Energies, , MC, March 2007, pp. 00, Proceedings of "EVER, International Conference on Electric Vehicles and Renewable Energies", url . .


COM.ACT.Int.34: C. Ravat, M. Woytazik, P.Y. Joubert, Y. Le Bihan, C. Marchand, E. Dufour-Gergam, J. Moulin, E. Martincic, Study For The Design Of Eddy Current Microsensor Arrays For Non Destructive Testing Applications, Transducers, Lyon, FR, June 2007, pp. 00, Actes de "Transducers", url . .


COM.ACT.Int.33: H. Hannoun, M. Hilairet, C. Marchand, Gain-scheduling PI current controller for a Switched Reluctance Motor, IEEE International Symposium on Industrial Electronics ISIE, Vigo, ES, June 2007, pp. 00, Proceedings of "IEEE International Symposium on Industrial Electronics ISIE", url . .


COM.ACT.Int.32: H. Hannoun, M. Hilairet, C. Marchand, Analytical modeling of switched reluctance machines including saturation, IEEE International Electric Machines and Drives Conference IEMDC, Antalya, TR, 2007, pp. 00, Proceedings of "IEEE International Electric Machines and Drives Conference IEMDC", url . .


COM.ACT.Int.31: Y. Le Bihan, J. Pavo, C. Marchand, Characterization of small cracks in eddy current testing, Institute of Engineering and Technology Colloquium on Reliability in Electromagnetic Systems, Paris, FR, May 2007, pp. 00, Actes de "Institute of Engineering and Technology Colloquium on Reliability in Electromagnetic Systems", url . .


COM.ACT.Int.30: Y. Le Bihan, J. Pavo, Y. Choua, M. Bensetti, C. Marchand, Study on the calculation by FEM-BIM combination of the EC signal due to a thin crack in presence of an edge, 12th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE 2007), Cardiff, GB, May 2007, pp. 00, Proceedings of "12th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE 2007)", url . .


COM.ACT.Int.29: L. Santandréa, Y. Choua, Y. Le Bihan, C. Marchand, Using mortar element method for eddy current testing finite element computations, Compumag 2007, Aachen, DE, June 2007, pp. 00, Proceedings of "Compumag 2007", url . .


COM.ACT.Int.28: M. Bensetti, Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Adaptive mesh refinement and probe signal calculation in eddy current NDT by complementary formulations, Compumag 2007, Aachen, DE, June 2007, pp. 00, Proceedings of "Compumag 2007", url . .


COM.ACT.Int.27: M. Bensetti, P. Vidal, J.C. Vannier, C. Marchand, Study and Optimisation of an Electrical Generator with Original Structure , XVII International Conference on Electrical Machines (ICEM), Chania - Crete Island , September 2006, pp. 00, Proceedings of "XVII International Conference on Electrical Machines (ICEM)", url . .


COM.ACT.Int.26: H. Hannoun, D. Diallo, C. Marchand, energy management strategy for a parallel hybrid electric vehicle using fuzzy logic, SPEEDAM, , NONE, May 2006, pp. 00, Proceedings of "SPEEDAM", url . .


COM.ACT.Int.25: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Thin Crack Modeling in ECT with Combined Potential Formulations , CEFC, Miami, US, April 2006, pp. 00, Proceedings of "CEFC", url . .


COM.ACT.Int.24: L. Santandréa, Y. Le Bihan, C. Marchand, A finite element modelling tool of a buried system for glass furnace wall characterization, 5ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2006), Lille, FR, November 2006, pp. 00, Actes de "5ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2006)", url . .


COM.ACT.Int.23: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, specific developments on a finite element tool for thin crack modelling in EC testing, ECNDT, berlin, September 2006, pp. 00, Proceedings of "ECNDT", url . .


COM.ACT.Int.22: J. Kappatou, C. Marchand, A. Razek, Induction machine analysis for the diagnosis of rotor faults using the leakage magnetic field, XVII International conference on electrical machines, ICEM 2006, Chania, Crête, September 2006, pp. 00, Proceedings of "XVII International conference on electrical machines, ICEM 2006", url . .


COM.ACT.Int.21: C. Marchand, Y. Le Bihan, A finite element modelling tool of a buried system for glass furnace wall characterization, 5ème conférence européenne sur les méthodes numériques en électromagnétisme, NUMELEC 2006, Lille, FR, 2006, pp. 00, Actes de "5ème conférence européenne sur les méthodes numériques en électromagnétisme, NUMELEC 2006", url . .


COM.ACT.Int.20: C. Da Silva, Z. Makni, M. Besbes, C. Marchand, A. Razek, R. Carlson, Eddy Current Losses and Demagnetization in Permanent Magnets, ICEM, Crete, September 2006, pp. 00, Proceedings of "ICEM", url . .


COM.ACT.Int.19: M. Hilairet, H. Hannoun, J. Mazouari, C. Marchand, Position and speed estimations of a switched reluctance machine using current harmonic, International Conference on Industrial Electronics IECON, Paris, FR, 2006, pp. 00, Actes de "International Conference on Industrial Electronics IECON", url . .


COM.ACT.Int.18: L. Santandréa, Y. Choua, Y. Le Bihan, C. Marchand, Adaptive mesh refinement for eddy current testing finite element computations, 6th International Conference on Computation in Electromagnetics (CEM 2006), Aachen, DE, April 2006, pp. 00, Proceedings of "6th International Conference on Computation in Electromagnetics (CEM 2006)", url . .


COM.ACT.Int.17: S. Rapacchi, Y. Le Bihan, J. Pavo, C. Marchand, ECT Characterization of the Extent of Minute Cracks using a Database Based Inversion Procedure, 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006), Miami, US, April 2006, pp. 00, Proceedings of "12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006)", url . .


COM.ACT.Int.16: Y. Le Bihan, J. Pavo, C. Marchand, Fast calculation of the response of an ECT probe in the presence of a crack, 9th European Conference on Non-Destructive Testing (ECNDT 2006), Berlin, DE, September 2006, pp. 00, Proceedings of "9th European Conference on Non-Destructive Testing (ECNDT 2006)", url . .


COM.ACT.Int.15: Z. Makni, M. Besbes, C. Marchand, Optimal Design of a Permanent Magnet Synchronous Machine using Coupled Analytical and Numerical Approaches, 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05), Bad Gastein (Salzburg), AT, 2005, pp. 00, Proceedings of "12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05)", url . .


COM.ACT.Int.14: J. Kappatou, C. Marchand, A. Razek, Finite Element Analysis for the Diagnosis of Broken Rotor Bars in 3-phase Induction Machine, International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF'2005), Baiona, ES, September 2005, pp. 00, Proceedings of "International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF'2005)", url . .


COM.ACT.Int.13: Y. Le Bihan, J. Pavo, M. Bensetti, C. Marchand, Computational Environment for the Fast Calculation of ECT Probe Signal , 15th Conference on the Computation of Electromagnetic Fields (COMPUMAG 2005), Shenyang, CN, June 2005, pp. 00, Proceedings of "15th Conference on the Computation of Electromagnetic Fields (COMPUMAG 2005)", url . .


COM.ACT.Int.12: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Modelling of a thin crack in ECT using a ψ-formulation with Whitney elements , 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05), Bad Gastein (Salzburg), AT, September 2005, pp. 00, Proceedings of "12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05)", url . .


COM.ACT.Int.11: M. Bensetti, Y. Le Bihan, C. Marchand, D. Premel, Neural networks eddy current non destructive evaluation of a conductive plate, 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05), Bad Gastein (Salzburg), AT, September 2005, pp. 00, Proceedings of "12th International Symposium on Applied Electromagnetics and Mechanics (ISEM'05)", url . .


COM.ACT.Int.10: E. De Cecco, Z. Makni, M. Besbes, C. Marchand, Sensitivity study with fractional factorial design and its integration in a CAD package for electromechanical systems, ISEF'05, International Symposium on Electromagnetic Fields in Mechatronics, Baiona, ES, 2005, pp. 00, Proceedings of "ISEF'05, International Symposium on Electromagnetic Fields in Mechatronics", url . .


COM.ACT.Int.9: M. Bensetti, Y. Le Bihan, C. Marchand, Development of an hybrid 3D finite element method for the modeling of micro-coil sensors and actuators, 5th European Magnetic Sensors and Actuators Conference (EMSA 2004), Cardiff, July 2004, pp. 00, Proceedings of "5th European Magnetic Sensors and Actuators Conference (EMSA 2004)", url . .


COM.ACT.Int.8: Z. Makni, E. De Cecco, M. Besbes, C. Marchand, F. Wurtz, Analytical and Numerical Analysis Based Design of a Permanent Magnet Synchronous Machine, OIPE'04, International Workshop on Optimization and inverse Problems in Electromagnetism, Grenoble, FR, 2004, pp. 00, Actes de "OIPE'04, International Workshop on Optimization and inverse Problems in Electromagnetism", url . .


COM.ACT.Int.7: C.M. Tassetti, M. Bensetti, G. Lissourgues, J.P. Gilles, Y. Le Bihan, C. Marchand, P. Nicole, Design, Modeling and Measurements of Tunable MEMS inductors, The international symposium on design, Test, Integration and packaging of MEMS/MOEMS, Montreux , CH, May 2004, pp. 00, Proceedings of "The international symposium on design, Test, Integration and packaging of MEMS/MOEMS", url . .


COM.ACT.Int.6: M. Bensetti, Y. Le Bihan, C. Marchand, C.M. Tassetti, G. Lissourgues, E. Dufour-Gergam, J.P. Gilles, An hybrid finite element method for the modeling of micro-inductors, Conference on Electromagnetic Field Computation, Seoul, KR, June 2004, pp. 00, Proceedings of "Conference on Electromagnetic Field Computation", url . .


COM.ACT.Int.5: M. Bensetti, Y. Le Bihan, C. Marchand, E. Dufour-Gergam, J.P. Gilles, C.M. Tassetti, G. Lissourgues, 3D Finite Element Modelling of micro-inductors, The 14th Conference on the Computation of Electromagnetic Fields, Saratoga Springs, New York, US, July 2003, pp. 00, Proceedings of "The 14th Conference on the Computation of Electromagnetic Fields", url . .


COM.ACT.Int.4: E. De Cecco, C. Marchand, M. Besbes, Software tool for conception and optimization of permanent magnet synchronous machines, 11th International Symposium on Applied Electromagnetics and Mechanics (ISEM'03), Versailles, FR, May 2003, pp. 00, Actes de "11th International Symposium on Applied Electromagnetics and Mechanics (ISEM'03)", url . .


COM.ACT.Int.3: M. Bensetti, Y. Le Bihan, C. Marchand, J. Pavo, Deposit characterization by eddy current nondestructive evaluation, The International Symposium on Applied Electromagnetics and Mechanics, Versailles, FR, May 2003, pp. 00, Actes de "The International Symposium on Applied Electromagnetics and Mechanics", url . .


COM.ACT.Int.2: Y. Le Bihan, J. Pavo, C. Marchand, Calculation of the ECT Signal of Minute Cracks by a FEM-BEM Hybrid Method, 4ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2003), Toulouse, FR, October 2003, pp. 00, Actes de "4ème conférence européenne sur les méthodes numériques en électromagnétisme (NUMELEC 2003)", url . .


COM.ACT.Int.1: M. Bensetti, Y. Le Bihan, C. Marchand, D. Premel, Non-destructive evaluation of layered planar media using MLP and RBF neural networks, The 8th International Workshop on Electromagnetic Nondestructive Evaluation, Saarbrucken, DE, June 2002, pp. 00, Proceedings of "The 8th International Workshop on Electromagnetic Nondestructive Evaluation", url . .


(26) Communications avec actes dans un congrès national


COM.Act.Nat.26: F. Roy, F. Ossart, C. Marchand, Gestion énergétique optimale au service de la conception de chaînes de traction hybrides, Symposium de Génie Electrique SGE 2014, Cachan, FR, July 2014, pp. , Actes de Symposium de Génie Electrique SGE 2014, url . .


COM.Act.Nat.25: X. Rain, G. Krebs, C. Marchand, Modélisation et caractérisation d'une machine à réluctance variable à double saillance avec bobinage d'excitation, SGE 2014, FR, 8 July 2014, pp. xx, Actes de SGE 2014, url . .


COM.Act.Nat.24: P. Estival, G. Krebs, C. Marchand, R. Sehab, B. Barbedette, Pré-dimensionnement d’une machine synchrone à aimants permanents validé par un modèle dynamique , SGE 2014, Cachan, FR, 8 July 2014, pp. xx, Actes de SGE 2014, url . .


COM.Act.Nat.23: C. Liu, G. Krebs, P. Dessante, C. Marchand, J.C. Vannier, Modélisation comportementale non-linéaire de moteurs asynchrones à cage pour le pré-dimensionnement, SGE 2014, Cachan, FR, 8 July 2014, pp. xx, Actes de SGE 2014, url . .


COM.Act.Nat.22: M. Belhadi, G. Krebs, C. Marchand, H. Hannoun, X. Mininger, Reduction des ondulations de couple et des efforts radiaux dans une machine a reluctance variable, Symposium de Génie Electrique (SGE), Cachan, FR, July 2014, pp. 1-8, Actes de Symposium de Génie Electrique (SGE), url . .


COM.Act.Nat.21: Y. Le Bihan, C. Marchand, J. Pavo, Quantitative Evaluation of Small Anomalies in Non-Destructive Testing using Partial Least Square Regression, Colloque Inductique 2013, Tizi-Ouzou, DZ, 24 April 2013, pp. 83-84, Actes de Colloque Inductique 2013, url . .


COM.Act.Nat.20: E. Frappé, A. De Bernardinis, O. Bethoux, C. Marchand, G. Coquery, Architecture électrique de sortie pour générateur pile à combustible de forte puissance, Électrotechnique du Futur, Belfort - France, FR, 15 December 2011, pp. 1-10, Actes de Électrotechnique du Futur, url . pdf .


COM.Act.Nat.19: S. Phrakonkham, A. Kébé, G. Remy, D. Diallo, C. Marchand, Optimized Sizing of AC Coupled Hybrid Sources for Isolated Villages, Conférence Électrotechnique du Futur, EF2011, FR, 2011, pp. 000, Proceedings of Conférence Électrotechnique du Futur, EF2011, url . pdf .


COM.Act.Nat.18: O. Maloberti, G. Krebs, C. Marchand, D. Condamin, L. Kobylanski, E. Bomme, Modélisation multiphysique d'un moteur synchrone à flux axial et à aimants permanents , Les journées Électrotechnique du Futur, EF2009 , Compiègne, FR, 24 September 2009, pp. pp.1-8, Actes de Les journées Électrotechnique du Futur, EF2009 , url . .


COM.Act.Nat.17: H. Hannoun, M. Hilairet, C. Marchand, Mise en oeuvre de la conduction continue pour la commande de la machine à réluctance variable, Congrès Electrotechnique du Futur, Compiègne, FR, September 2009, pp. 1-6, Actes de Congrès Electrotechnique du Futur, url . pdf .


COM.Act.Nat.16: T. Azib, O. Bethoux, G. Remy, C. Marchand, E. Berthelot, COMPARAISON D’ARCHITECTURES D’HYBRIDATION D’UNE PILE À COMBUSTIBLE AVEC DES SUPERCONDENSATEURS , EF 2009, Électrotechnique du futur , COMPIEGNE, FR, 24 September 2009, pp. 1-11, Actes de EF 2009, Électrotechnique du futur , url . pdf .


COM.Act.Nat.15: Y. Choua, L. Santandréa, Y. Le Bihan, C. Marchand, Modélisation de défauts de faible ouverture pour le CND par courants de foucault, Colloque National sur l'inductique (CNI'09), Laghouat, DZ, 14 April 2009, pp. 74-78, Actes de Colloque National sur l'inductique (CNI'09), url . .


COM.Act.Nat.14: C. Ravat, Y. Le Bihan, P.Y. Joubert, C. Marchand, M. Woytazik, E. Dufour-Gergam, J. Moulin, E. Martincic, Detection of small surface breaking cracks using a microcoil array eddy current sensor, Colloque National sur l'Inductique (CNI'09), Laghouat, DZ, 14 April 2009, pp. 79-82, Actes de Colloque National sur l'Inductique (CNI'09), url . .


COM.Act.Nat.13: A. Ospina Vargas, L. Santandréa, Y. Le Bihan, C. Marchand, Prise en compte dans la modélisation d'un problème de CND par CF d'une région conductrice de faible épaisseur, Les Journées Cofrend 2008, Toulouse, FR, May 2008, pp. 9 p., Actes de "COFREND", url . .


COM.Act.Nat.12: C. Ravat, P.Y. Joubert, Y. Le Bihan, C. Marchand, M. Woytazik, E. Dufour-Gergam, Performances d’une sonde matricielle à microbobines pour la détection par courants de Foucault de défauts débouchants de faibles dimensions, Journées COFREND 2008, Toulouse, FR, May 2008, pp. 9 p., Actes de "Journées COFREND", url . .


COM.Act.Nat.11: H. Hannoun, M. Hilairet, C. Marchand, Mise en oeuvre d'une commande à gain variable appliquée aux machines à réluctance variable, Congrès Electrotechnique du Futur, Toulouse, FR, September 2007, pp. 00, Actes de "Congrès Electrotechnique du Futur", pdf .


COM.Act.Nat.10: C. Ravat, Y. Le Bihan, P.Y. Joubert, C. Marchand, Etude quantitative d'agencements de multicapteurs à courants de Foucault pour la détection de défauts débouchants, Réunion plénière GDR Interférences d'Ondes, Pessac, FR, November 2007, pp. , Actes de "Réunion plénière GDR Interférences d'Ondes", url . .


COM.Act.Nat.9: Y. Choua, M. Bensetti, L. Santandréa, Y. Le Bihan, C. Marchand, Développement d'un outil de simulation numérique pour le CND par courants de Foucault, LES JOURNEES EF'2007 ET CSAME'2007, ENSEEIHT, Toulouse, FR, September 2007, pp. 00, Actes de "LES JOURNEES EF'2007 ET CSAME'2007", url . .


COM.Act.Nat.8: Z. Makni, M. Besbes, C. Marchand, Outil d'analyse Multi-physique pour la conception d'actionneurs éléctromagnétiques, Electotechnique du Futur, EF, Toulouse, FR, September 2007, pp. 00, Actes de "Electotechnique du Futur, EF", url . .


COM.Act.Nat.7: H. Hannoun, M. Hilairet, C. Marchand, Un régulateur PI à gain variable pour l'asservissement en courant dans les machines à réluctance variable, JDMACS, Reims, FR, 2007, pp. 00, Actes de "JDMACS", pdf .


COM.Act.Nat.6: M. Rekik, M. Besbes, C. Marchand, B. Multon, S. Loudot, D. Lhotellier, Optimisation du nombre de spires et des angles de commande d'un moteur à réluctance variable à double saillance pour application de traction électrique, Electrotechnique du Futur, Grenoble, FR, September 2005, pp. 00, Actes de "Electrotechnique du Futur", url . .


COM.Act.Nat.5: Y. Le Bihan, M. Bensetti, Y. Choua, C. Marchand, L. Pichon, Modélisations BF et HF de bobines gravées, Les journées de la simulation numérique, Nantes, FR, November 2005, pp. 00, Actes de "Les journées de la simulation numérique", url . .


COM.Act.Nat.4: M. Bensetti, Y. Le Bihan, C. Marchand, Inversion en CND par réseaux de neurones, Journées COFREND, Beaune, FR, May 2005, pp. 00, Actes de "Journées COFREND", url . .


COM.Act.Nat.3: Z. Makni, E. De Cecco, M. Besbes, C. Marchand, Outil multi-physique pour la conception de Machines Synchrones à Aimants Permanents - Couplage d'approches analytique et numérique., EF'05, Electrotechnique du futur, Grenoble, FR, 2005, pp. 00, Actes de EF\\'05, Electrotechnique du futur, url . .


COM.Act.Nat.2: D. Diallo, M.E.H. Benbouzid, C. Marchand, Surveillance d'un Entraînement Asynchrone alimenté par un Onduleur de Tension Triphasé : Un Pas Vers la Fiabilité des Systèmes de Puissance, Electrotechnique du Futur, Grenoble, FR, September 2005, pp. 00, Actes de "Electrotechnique du Futur", url . .


COM.Act.Nat.1: Y. Le Bihan, J. Pavo, C. Marchand, Calcul rapide de la réponse d'une sonde CF en présence d'une fissure, Les Journées Cofrend 2005, Beaunes, FR, May 2005, pp. 00, Actes de "Les Journées Cofrend 2005", url . .


(2) Communications sans actes dans un congrès national


COM.SAct.Nat.2: G. Remy, C. Marchand, Bilan du projet O2M sur la conception et l'optimisation de systèmes mécatroniques pour l’automobile, GIFAS, Commission R&D, Groupe de travail Systèmes Electriques, Paris, FR, 6 October 2011, pdf .


COM.SAct.Nat.1: G. Remy, M. Kamali Nejad, T. Azib, O. Bethoux, C. Marchand, Structuration de modèles pour l’optimisation parallélisée sous Matlab, Webinar DIMOCODE de la communauté 'Actionneurs Électriques' , Paris, FR, 25 May 2011, pdf .


(2) Conférences données à l'invitation d'un comité d'organisation dans un congrès international


COM.INV.Int.2: G. Remy, O. Bethoux, C. Marchand, H. Dogan, Review of MPPT Techniques for Photovoltaic Systems, 2nd International Conference on “Energy and Environmental Protection in Sustainable Development”, Hebron, IL, November 2009, pp. 000, Actes de 2nd International Conference on “Energy and Environmental Protection in Sustainable Development”, url . pdf .


COM.INV.Int.1: G. Remy, K. Ejjabraoui, C. Larouci, H. Melhem, F. Mhenni, R. Sehab, P. Lefranc, B. Barbedette, S.A. Raka, C. Combastel, S. Cannou, F. Cardon, P. Cuvelier, C. Marchand, D. Barbier, Modeling guidelines and tools comparison for electromechanical system design in automotive applications - Application to a motorized hatchback, Proceedings of the 7th European Mechatronics Meeting, Paris, FR, 25 June 2009, pp. 00, Proceedings of Proceedings of the 7th European Mechatronics Meeting, url . pdf .


(2) Conférences données à l'invitation d'un comité d'organisation dans un congrès national


COM.INV.Nat.2: G. Krebs, Y. Le Bihan, C. Marchand, F. Alves, Prise en compte des milieux fins dans le CND CF grâce à la méthode overlapping, Colloque National sur l'Inductique, Béjaïa, DZ, 3 May 2011, pp. x, Actes de Colloque National sur l'Inductique, url . .


COM.INV.Nat.1: Y. Le Bihan, C. Marchand, F. Alves, Modélisation en CND : de la conception à l’inversion, Colloque National sur l'Inductique (CNI'09), DZ, 14 April 2009, pp. 10, Actes de Colloque National sur l'Inductique (CNI'09), url . .